Flexural study of Nano concrete for structural elements - A review

  • Uma Chandru Coimbatore Institute of Technology, Coimbatore
  • Dr Kaarthik M Coimbatore Institute of Technology, Coimbatore https://orcid.org/0000-0002-6961-9827
  • Ms. Karthikadevi S Coimbatore Institute of Technology, Coimbatore
  • Jayandiran R Coimbatore Institute of Technology, Coimbatore
Keywords: Nano concrete, materials, flexural strength, Concrete technology, materials science

Abstract

Materials science is consistently one of the active research topics in present scenario with ultimate motive is to enhance the strength and durability of any materials. In civil engineering nano concrete becomes popular globally in present time which has potential to produce concrete with more strength and durable and it also considered as a concrete for future generations. This article presents brief information about performance of nano concrete under flexural strength. The article covers deep insight of previously published quality literature along with future scope and conclusion.

Downloads

Download data is not yet available.

Author Biographies

Uma Chandru, Coimbatore Institute of Technology, Coimbatore

Department of Civil Engineering

Dr Kaarthik M, Coimbatore Institute of Technology, Coimbatore

Department of Civil Engineering

Ms. Karthikadevi S, Coimbatore Institute of Technology, Coimbatore

Department of Civil Engineering

Jayandiran R, Coimbatore Institute of Technology, Coimbatore

Department of Civil Engineering

References

P. Di Maida, C. Sciancalepore, E. Radi, and F. Bondioli, “Effects of nano-silica treatment on the flexural post cracking behaviour of polypropylene macro-synthetic fibre reinforced concrete,” Mech. Res. Commun., vol. 88, pp. 12–18, 2018, doi: 10.1016/j.mechrescom.2018.01.004.

S. Natarajan and S. Senthil Selvan, “Experimental study on axial compression behaviour of glass fibre reinforced polymer (GFRP) wrapped nano material concrete columns,” Mater. Today Proc., vol. 39, pp. 748–757, 2020, doi: 10.1016/j.matpr.2020.09.444.

A. M. Mohamed, “Influence of nano materials on flexural behavior and compressive strength of concrete,” HBRC J., vol. 12, no. 2, pp. 212–225, 2016, doi: 10.1016/j.hbrcj.2014.11.006.

D. Pavan Kumar, S. Amit, and M. Sri Rama Chand, “Influence of various nano-size materials on fresh and hardened state of fast setting high early strength concrete [FSHESC]: A state-of-the-art review,” Constr. Build. Mater., vol. 277, p. 122299, 2021, doi: 10.1016/j.conbuildmat.2021.122299.

M. Jemimah Carmichael and G. Prince Arulraj, “Impact resistance of concrete with nano materials,” Mater. Today Proc., vol. 37, pp. 677–684, 2020, doi: 10.1016/j.matpr.2020.05.635.

R. Abiraami et al., “Mechanical and flexural behaviour study on fibrillated concrete as partial replacement of M-Sand and metakaolin,” Mater. Today Proc., vol. 39, pp. 776–780, 2020, doi: 10.1016/j.matpr.2020.09.507.

E. Cuenca, L. D’Ambrosio, D. Lizunov, A. Tretjakov, O. Volobujeva, and L. Ferrara, “Mechanical properties and self-healing capacity of Ultra High Performance Fibre Reinforced Concrete with alumina nano-fibres: Tailoring Ultra High Durability Concrete for aggressive exposure scenarios,” Cem. Concr. Compos., vol. 118, p. 103956, 2021, doi: 10.1016/j.cemconcomp.2021.103956.

E. T. Dawood and M. S. Mahmood, “Production of Sustainable concrete brick units using Nano-silica,” Case Stud. Constr. Mater., vol. 14, p. e00498, 2021, doi: 10.1016/j.cscm.2021.e00498.

A. M. Erfan, H. E. Hassan, K. M. Hatab, and T. A. El-Sayed, “The flexural behavior of nano concrete and high strength concrete using GFRP,” Constr. Build. Mater., vol. 247, p. 118664, 2020, doi: 10.1016/j.conbuildmat.2020.118664.

M. Somasri and B. N. Kumar, “Materials Today : Proceedings Graphene oxide as Nano material in high strength self-compacting concrete,” Mater. Today Proc., no. xxxx, 2021, doi: 10.1016/j.matpr.2020.12.1085.

S. Kim, M. J. Kim, H. Yoon, and D. Y. Yoo, “Effect of cryogenic temperature on the flexural and cracking behaviors of ultra-high-performance fiber-reinforced concrete,” Cryogenics (Guildf)., vol. 93, no. June, pp. 75–85, 2018, doi: 10.1016/j.cryogenics.2018.06.002.

Y. Du, J. Wang, C. Shi, H. J. Hwang, and N. Li, “Flexural behavior of alkali-activated slag-based concrete beams,” Eng. Struct., vol. 229, no. August 2020, p. 111644, 2021, doi: 10.1016/j.engstruct.2020.111644.

D. S. Vijayan, J. Revathy, and R. Scholar, “Study on Retrofitted RCC Beams,” Int. J. Eng. Sci. Comput., vol. 6, no. 5, p. 5664, 2016, doi: 10.4010/2016.1381.

S. J. Lee and J. P. Won, “Flexural behavior of precast reinforced concrete composite members reinforced with structural nano-synthetic and steel fibers,” Compos. Struct., vol. 118, no. 1, pp. 571–579, 2014, doi: 10.1016/j.compstruct.2014.07.042.

D. S. Vijayan and J. Revathy, “‘Flexural behavior of reinforced and pre-stressed concrete beam using finite element method,’” Int. J. Appl. Eng. Res., vol. 10, no. 1, pp. 717–736, 2015.

E. Koda, A. Szymanski, and W. Wolski, “Field and laboratory experience with the use of strip drains in organic soils,” Can. Geotech. J., vol. 30, no. 2, pp. 308–318, 1993, doi: 10.1139/t93-026.

Published
2021-12-15
How to Cite
Chandru, U., M, K., S, K., & Ramkumar, J. (2021). Flexural study of Nano concrete for structural elements - A review. PREPARE@u® | IEI Conferences. https://doi.org/10.36375/prepare_u.iei.a206
Section
- 36.IEC | Civil Engineering