Experience of Belt Jump and Sway in a Short Belt Conveyor

DOI: https://doi.org/10.36375/prepare_u.iei.a237
Keywords: Conveyor; Material handling; Belt; Troughability; Sway; Jump., Conveyor, Material handling, Belt, Troughability, Sway, Jump

Abstract

A limestone handling belt conveyor intended to carry 200 Metric Tonnes per hour met challenges during the start of operation. Simple conveyor, simple design parameters and rather simple layout yet engineers were rather struggling to tame the running of the conveyor.

This paper intends to provide the problems faced, analysis/diagnosis of the problem & remedial measures suggested. It is really an eye opener for young bulk material handling engineers working in the industry. It is also lesson learning for experienced engineers of the industry to create checks and balances in the working system to eliminate any lapse that can creep in but could be avoided.

Downloads

Download data is not yet available.

Author Biography

Anirban Datta, MESCIA Engineers

Chief Technology Officer

References

Belt Conveyors for Bulk Materials, 6th Ed., 2nd printing, published by Conveyor Equipment Manufacturers Association (CEMA), pp. 208

Selecting the Proper Conveyor Belt, Fenner Dunlop – Conveyor Belting Americas, pp. 13

Published
2021-12-15
How to Cite
DATTA, A. (2021). Experience of Belt Jump and Sway in a Short Belt Conveyor. PREPARE@u® | IEI Conferences. https://doi.org/10.36375/prepare_u.iei.a237
Issue
2021: 36.IEC
Section
- 36.IEC | Mechanical Engineering

Copyright (c) 2021 ANIRBAN DATTA

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

I/We agree with the provision of the Bye-Law 118 of The Institution of Engineers (India) which states that copyright of each paper published in Institution Journal or Annual Technical Volume in full or in Abstract at its centres shall lie with the Institution.